The robot controller is composed of a transmitter "KRC-3AD" and a receiver "KRR-1".●It is a hybrid controller system. Two sticks, eight buttons and four shifts have been added. ●You can also use the low speed port, which was not possible before. ※It is compatible with RCB-3/RCB-3J ● You can also control directly your robot with a wire. As a result, you can control it even if there is a radio restriction.● It adopts AD band. It is possible to control your robot in the midst of 19 robots with no radio interference.● You can switch for a little rod antenna.

KRC-1 is the robot controller itself. If you have the wireless parts KRT-1 or KRT-3, install them in KRC-1 and you will be abble to enjoy wireless control.

KRC-1 robot controller/ Equipped with 16 keys/FM AD band type/ used with 8 dry battery cells (not included)● KRT-3 module pack/changeable crystal (possible to control up to 20 machines at a time) ● KRR-1 receiver ● Antennas (1 for KRT-3, 1 for KRR-1) ● Crystals (1 for receiving, 1 for transmission) ● KRR-1 connection cable ● Start link cable ● Antenna guide c ● Furnishing screw for transmitter antenna.