●Replacement model of KRS-2350HV ●Suitable for striker conversion kit and other robot parts ●The maximum motion angle 180 degrees ●Torque29.5kg/cm ●Speed 0.13sec/60°※used with Ni-Cd 9 cell ●41×38×20（mm）●61.5g ●Adaptable voltage 9〜12V● Full option is equipped (whole metal gear, hard servo gear shaft, metal bushing case, heat sink case etc.)

●The maximum motion angle 270 degrees ●Torque 40.8kg/cm ● Speed 0.19sec/60°※used with Ni-Cd 9 cell ●43×32×32.5mm ●65g●Adaptable voltage 9V〜12V ● Strengthen final gear ●Whole metal gear ●Correspondent control board RCB-1/3HV, motion processor HV★Accessories : connection cable G（400mm）

●The maximum motion angle 260 degrees ●Torque 10.5kg/cm● Speed 0.17sec/60°※used with Ni-Cd 9 cell ●43×32×32.5 mm ●48.5g ●Adaptable voltage 9V〜12V ●Strengthened hybrid gear ●Correspondent control board RCB-1/3HV、motion processor HV★Accessories : connection cable G（400mm), Low heigh horn

●The maximum motion angle 270 degrees ●Torque 27.0kg/cm● Speed 0.12sec/60°※used with Ni-Cd 9 cell ●43×32×32.5 mm ●65g ●Adaptable voltage 9V〜12V● Strengthen final gear● Whole metal gear ●Correspondent control board RCB-1/3HV, motion processor HV★Accessories : connection cable G（400mm)

●Full option is equipped (whole metal gear, hard servo gear shaft, metal bushing case, heat sink case, heat sink case etc.) and correspondence to HV spec up ●ICS settings and instruction system exclusively for RED Version are possible ●62g ●41×38×20 mm ●Adaptable voltage : 9～12V ●Torque：29.5kg・cm　●Speed：0.13sec/60°※used with Ni-Cd 9 cell