6pcs set No.03049 Open
Max Torque: 13.0kg･cm
Max Speed: 0.16s/60deg.
Maximum operating angle: 270°(±135°)
Gear ratio: 346.6:1
Power-supply voltage: HV(9-12V)
Connector: Servo connector
Communication standard: ICS3.5 (Serial/PWM)
Baud rate: 115200/625000/1250000bps
Initial setting: ID0 / BR115200
Signal level: TTL
Rotation mode: Possible
<Supported control board>
Dual USB Adapter HS
ICS USB Adapter HS
Connection cable G Black (400mm) 1pcs
M3-8 Low head horn screw 1pcs
Connection cable G Black (400mm) 6pcs
M3-8 Low head horn screw 6pcs
Made in Japan
Cube-shaped 4000 Series torque type. Extensive options make for easy embedding in the robot. Special aluminum gears, ball bearings and other parts provide a high level of rigidity.
This servo is mounted by combining resin gear and metal gear.
Durability has increased by making the final gear a special aluminum gear.
Case: KRS 4030 Series
The case is cube-shaped, so it is easy to embed in the robot. The robot’s silhouette looks good no matter which direction the case is oriented. The dimensions have not changed from the previous KRS-4013/4014, so they can be replaced with the new model without changing the frame. Extensive lineup of options for connecting the servo motor. Combinations of options can make it simple to embed the motor in the robot. Also, the case has been reinforced for stronger shock resistance.
Communication specifications: ICS3.5
Communication uses ICS3.5, which allows you to select between serial and PWM. Servo motor communication can be changed based on the microcomputer board used for control.
Also, in serial mode, with serial and PWM, IDs can be assigned to the servo motors, so multi-drop connection in which the servo motors are connected is possible. A red LED light indicating the communication status is mounted on the main unit. ICS3.5 allows you to change various items like the servo motor’s operating speed and retention characteristics. For details, refer to the following.
* Servo motor settings require Dual USB Adaptor HS or ICS USB Adaptor HS.
Control from the control board "RCB-4HV"
You can easily control the servo by combining RCB-4 HV with Motion Creation Software HeartToHeart 4.
RCB-4HV has 2 lines for servo control, 10 ports for analog sensor and 10 ports for digital I/O terminal are prepared.
Using HeartToHeart4, you can create motion and adjust the robot. Motion can be created by arranging controls (panels) with various functions. You can create a simple "greeting" motion, etc. You can also create complex motions such as sensors and wireless controller buttons.
By assigning ID numbers to each servo and making multi-drop connection, devices are connected and communicate.
Control from PC
By using the Dual USB adapter HS you can control the servo directly from the PC.Please send the command referring to the published "Software manual (command reference)".Communication methods and samples are also published, so please see the following article for details.
Control from Microcomputer board or PC board
ICS devices such as KRS servo can be controlled from the UART terminal of the commercial board. ICS has the Tx (transmit) and Rx (receive) signal lines of the ICS device are integrated, it was necessary to prepare the circuit when connecting to the UART terminal. Circuits necessary for communication are prepared on this conversion board. You can communicate with the ICS device simply by connecting each terminal to the board. Please refer to "Software manual (command reference)" about communication method and command.
*When using with Arduino UNO
KSB Shield 2
We released a library for Arduino. Please download it from the link below.
For detailed usage of the Arduino library, please see this article.
You can set the servo ID and communication speed by using the ICS 3.5 / 3.6 Manager software. Various parameters such as "stretch" and "speed" can be changed.
For HV servo, please use 3 cell (9.9 V) Lithium Ferrite battery(Li-Fe).
*Handling the battery requires caution.Please read this article before using.
For robots with fewer servos mounted like arm type, you can use the following AC adapter. Be careful of the current capacity when using it.